Schmidt ｜Spreader｜Traxos

The spreading material hopper is made of steel and has high-quality corrosion protection. The spreaders can be installed quickly and easily, making them usable in a very short time, while the driver can load the spreader alone using the self-loading equipment. The spreading material hopper is tilted hydraulically, pushed into the spreading material like a loading shovel and then returned. There is an optional cover to protect the spreading material. The Traxos series is powered by the tractor hydraulics.

The spreading material slides safely to the base of the V-shaped hopper on an auger conveyor. The open auger, which is spiralled left and right, conveys the spreading material in precisely metred quantities to the central distributor. The material is spread via a stainless steel spreading disc with a 350mm diameter (Traxos 05 and 08) or a 490mm diameter (Traxos 09 and 18).

The Traxos 12 and 15 are also available as wet salt versions. The 430 litre liquid tank is made of resistant polyethylene with an integral level indicator.

The spreading material is spread via a stainless-steel disc with a 350mm diameter (Traxos 05 and 08) or a 490mm  diameter (Traxos 09 and 18) to give spreading widths of 2–6 m or 8m, while the spreading density can be infinitely adjusted. There is a choice between 5g/m² and 40g/m² for de-icing materials and between 40g/m² and 300g/m² for gritting materials.

The spreading width can be infinitely adjusted via the EC or EP control panel in the driver's cab. Alternatively, manual adjustment via the hydraulic valves is also possible. With an EvolutionLine control panel, however, the Traxos spreader can be adjusted in a completely road-speed related manner with a closed control circuit for precise dosages.