Schmidt ｜Snow plough｜CP

The CP has a special blade shape with a high degree of inclination that guarantees a clean snow flow with short placement at low clearing speed, and wide snow distribution at high clearing speed. The torsion-resistant and stable box construction guarantees a very high stability at low weight. To minimise the amount of road salt, the CP delivers aggressive and very thorough clearing due to the 13° angle of attack of the cutting edge. 

The CP is equipped with a fully automatic, robust override system for safe clearing operations without interruption. Rotary flaps with scraper strips, pre-tensioned by disc spring assemblies, give way to the rear when approaching obstacles and then spring back into the normal position, while the height of the plough remains constant and allows uninterrupted  snow clearance.

Steel cutting edge (S)

A multi-purporpose, cost optimised solution for aggressive clearing of hard and/or compact snow. Steel cutting edges are resistant to bending and twisting, giving a clean result.

Combi cutting edge size 36 (C 36)

A more durable cutting edge made of steel, rubber and ceramic. This cutting edge is meant for aggressive snow clearing and can be a good alternative if the steel cutting edge is wearing out too fast. The combination of meterials ensures noise and vibration reduction. 

Rubber cutting edge (R)

A good solution for use on inner city roads and speciality properties like parking lots. Due to the flexible and elastic characteristics of rubber, it glides smoothly over the surface. A rubber cutting edge is especially efficient when clearing snow slush. 

A three-point lift, with automatic transverse tilt compensation, enables the plough to be raised and lowered accurately with precision. A swing device moves the plough automatically between working and transport positions. Turning and lifting cylinders are the same which enable easier maintenance of the plough. 

A pressure relief valve mounted on the lifting cylinder reduces the pressure on the ground and protects cylinder and snow plough from overload. A lowering brake valve slows the plough during lowering, but lifts it at full speed. The hydraulic lift and swivel cylinders are made of stainless steel piston rod for improved resistance, while the share stop is made from noise and vibration-reducing polyurethane for greater efficiency.

The castor wheels ensure precise adjustment of the snow plough and provide appropriate aggressiveness during snow clearing. They support the frame when driving over obstacles and extend the service life of the cutting edge.

A snow deflector prevents poor visibility due to snow swirling up to the wind- screen of the vehicle. The CP has an adjustable snow deflector made of cloth. This version is particularly suitable for powder snow and high speeds. Prevent the snow flow over the ploughshare direct on the windscreen.

For optimum positioning of the snow plough on different vehicle plates, the device plate is height-adjustable and can be attached to vehicle plates according to DIN Form A or B, plus plates with the national standards of Switzerland, Austria and France. Besides, it is also possible to adapt the 3-point hitch to tractors.

• Kerbstone deflector
• Impellers
• Parking trolley with wheels
• Adjustable snow dust protection