Schmidt ｜Snow plough｜Tarron

Particularly high and wide snow removal is achieved by the flow-optimised, rounded blade shape, operating at a 25° angle and being raised on the right. The outside blades are tensioned with an extra spring for increased pressure. Each blade segment is equipped with four rigid links for optimal guiding. The torsion-resistant links are made of polyethelene. This helps reduce noise and vibration, as do the polymer blade stops on each blade segment.

In conjunction with the shock absorber mount, the blade sections can deflect around obstacles to prevent damage. After each obstacle, a powerful blade retaining spring returns the sections back to the clearing position. A shock absorber mount between the cutting edge and the plough absorbs all the tractive forces.

Steel cutting edge (S)

A multi-purpose, cost optimised solution for aggressive clearing of hard and/or compact snow. Steel cutting edges are resistant to bending and twisting, giving a clean result.

Combi cutting edge (size 36 and 50) (C36 / C50)

A more durable cutting edge made of steel, rubber and ceramic. This cutting edge is meant for aggressive snow clearing and can be a good alternative if the steel cutting edge is wearing out too fast. The combination of materials ensures noise and vibration reduction.

TUCA SX cutting edge

A state-of-the-art, high performance cutting edge designed for long- term use. The patented Küper Wave Technology uses a curved profile to remove snow without resistance. Separate tungsten holders embedded in rubber and vulcanized between front and rear Hardox 400 steel plate make the TUCA SX incredibly durable.

Rubber cutting edge (R)

A good solution for use on innercity roads and speciality properties like parking lots. Due to the flexible and elastic characteristics of rubber, it glides smoothly over the surface. A rubber cutting edge is especially efficient when clearing snow slush.

GK 5 cutting edge (GK 7)

A GK cutting edge allows for more efficient snow slush clearing with longer service life and less friction. This cutting edge is made of steel, rubber and corundum and is therefore more aggressive than a rubber cutting edge.

The three-point lift with automatic transverse tilt compensation enables the plough to be raised and lowered accurately and straight. A swing device moves the plough automatically between working and transport positions. The hydraulic lift and swivel cylinders of the lifting system are made of stainless steel piston rod for improved resistance.

Lateral adjustment is actuated by two powerful double-action swivel cylinders that position the Tarron in the selected clearing position without backlash.

Castor wheels

The infinitely height-adjustable castor wheels with optional splash guards ensure precise adjustment of the snow plough and provide appropriate aggressiveness during snow clearing. They support the frame when driving over obstacles and extend the service life of the cutting edge.

Sliding shoes

Alternatively, maintenance-free height-adjustable sliding shoes can be fitted. They are made of highly wear-resistant steel or combi.

The side deflectors help keep the plough from scraping against kerbs and edges when clearing in urban areas.

A snow deflector prevents poor visibility due to snow swirling up to the windscreen of the vehicle. There are three variants to choose from.

1. an elastic snow deflector made of polyurethane, suitable for all kind of snow. Due to its patented joint covers, it prevents slush from getting between the blades.

2. a snow dust cover made of rubber. The ideal solution for semi-professional use.  

3. an adjustable snow deflector made of cloth. This version is particularly suitable for powder snow and high speeds. A combination with the polyurethane or rubber snow deflector is possible.

The mounting device is height-adjustable, so that Tarron series ploughs can be positioned correctly on different vehicle mounting plates. The snow plough can be mounted on a truck, Unimog, tractor or wheel loader.

• Steel or polyurethane blade enlargement
• Fine-finish blade for the MS 32, 34, 36 and 40
• Warning marks, warning flags or LumiFog
• LED marker lights